Detection versus sustained attention to drug cues have dissociable roles in mediating drug seeking behavior.

It is commonly thought that attentional bias for drug cues plays an important role in motivating human drug-seeking behavior. To assess this claim, two groups of smokers were trained in a discrimination task in which a tobacco-seeking response was rewarded only in the presence of 1 particular stimulus (the S+). The key manipulation was that whereas 1 group could control the duration of S+ presentation, for the second group, this duration was fixed. The results showed that the fixed-duration group acquired a sustained attentional bias to the S+ over training, indexed by greater dwell time and fixation count, which emerged in parallel with the control exerted by the S+ over tobacco-seeking behavior. By contrast, the controllable-duration group acquired no sustained attentional bias for S+ and instead used efficient detection of the S+ to achieve a comparable level of control over tobacco seeking. These data suggest that detection and sustained attention to drug cues have dissociable roles in enabling drug cues to motivate drug-seeking behavior, which has implications for attentional retraining as a treatment for addiction. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

High-throughput double quantitative competitive polymerase chain reaction for determination of genetically modified organisms

Quantitative competitive polymerase chain reaction (PCR), especially the double competitive PCR methods (DC-PCR), have evolved as reliable approaches to quantification of genetically modified organisms (GMO) in food. However, DC-PCR is a low-throughput method because it requires titration of each sample with various amounts of a competitive internal standard, a protocol that involves several PCRs per sample followed by electrophoresis and densitometry. To address this drawback, we have developed a new method for GMO quantification, namely, a high-throughput double quantitative competitive PCR (HT-DCPCR). In HT-DCPCR, electrophoresis and densitometry are replaced by a rapid, microtiter well-based bioluminometric hybridization assay and there is no need for titration of each sample. The determination of GM soya was chosen as a model. We have constructed internal standards (DNA competitors) both for the 35S promoter sequence and for a plant-specific reference gene (lectin). The competitors have identical size and share the same primer binding sites with the target sequences but differ in a 24-bp internal segment. Each target sequence (35S and lectin) is coamplified with a constant amount (1000 copies) of the respective competitor. The four amplified fragments are hybridized with specific probes and captured on a universal solid phase to achieve simplicity and high throughput. The hybrids are determined by using streptavidin conjugated to the photoprotein aequorin. The ratio of the luminescence values obtained for the target and the competitor is linearly related to the starting amount of target DNA. The limit of quantification for the 35S promoter is 24 copies. The proposed method was evaluated by determining the GMO content of soybean powder certified reference materials. Also HT-DCPCR was compared to real-time PCR in a variety of real samples.     

Hydrothermal Dissolution of Perovskite: Implications for Synroc Formulation

The results of a transmission electron microscope study of the hydrothermal alteration products formed by perovskite and two titantate-based "synroc" formulations are reported. It was found that perovskite, the host phase for strontium-90, dissolved at combined temperatures and pressures greater than 110°C and 180 kPa. Dissolution of perovskite was accompanied by an epitaxial crystallization of the titanium dioxide polymorphs, brookite and anatase. Hollandite, which incorporates cesium-137, dissolved more slowly than perovskite, with only minor TiO₂ crystallization. Intergrowths of zirconolite and zirkelite, the principal actinide-containing phases, were highly resistant to hydrothermal treatments, maintaining their integrity under all experimental conditions.     

Predicting bioavailability of sediment-associated organic contaminants for Diporeia spp. and oligochaetes

Biota-sediment accumulation factors (BSAF) were calculated for Diporeia spp. and oligochaete worms exposed to polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) from field-collected sediment. These data were compared to the contaminant fraction extracted from sediment with Tenax resin using a 24 h extraction. A previous laboratory study suggested a linear relationship between log BSAF and the contaminant fraction rapidly desorbed from sediment. However, the BSAF data in our study did not fit this relationship. Better predictive regressions for both PCBs and PAHs were found when the log of the lipid-normalized organism contaminant concentrations were plotted against the log of the Tenax-extracted organic carbon-normalized sediment contaminant concentration. Regression lines for the two species had the same slope, but the Diporeia intercept was 2.3 times larger. When adjusted for a 6 h Tenax extraction, based on a regression between 6 and 24 h Tenax extractions, data from this study and two other studies that included multiple oligochaete species fit a single predictive regression. The exception included some PAHs that fell below the regression line. Thus, a single relationship generally predicted bioaccumulation across sediments, compound classes, oligochaete species, and among laboratories.     

Sharp Phylogeographic Breaks and Patterns of Genealogical Concordance in the Brine Shrimp Artemia franciscana

Genealogical concordance is a critical overlay of all phylogenetic analyses, irrespective of taxonomic level. To assess such patterns of congruence we have compiled and derived sequence data for two mitochondrial (16S rRNA, COI) and two nuclear (ITS1, p26) markers in 14 American populations of the hypersaline branchiopod Artemia franciscana. Cladistic analysis revealed three reciprocally monophyletic mitochondrial clades. For nuclear DNA, incomplete lineage sorting was evident presumably as a result of slower coalescence or male-mediated dispersal. Our findings capture the genealogical interval between gene splitting and population divergence. In this sense, strong indications are provided in favour of a superspecies status and ongoing speciation in A. franciscana.     

The Effect of Fines on Critical State and Liquefaction Resistance Characteristics of Non-Plastic Silty Sands

Monotonic and cyclic triaxial tests were carried out on sand-silt mixtures for the investigation of the effect of fines content on their critical state and liquefaction resistance characteristics. Both the undrained and the drained monotonic tests produce a unique critical state line for each tested mixture, which moves downwards with increasing fines content up to a threshold value of 35% and then upwards. At a given void ratio and mean effective stress, the liquefaction resistance ratio decreases with increasing fines content up to the same threshold value of 35%, and increases thereafter with further increasing fines content. However, at a given intergranular void ratio, defined as the ratio of the volume of fines plus voids to that of sand particles, liquefaction resistance ratio increases with increasing fines content up to the threshold value. The threshold fines content value, which is an important parameter in determining the transition from the sand dominated to the silt dominated behaviour of sand-silt mixtures, is related to their particle packing. An expression is proposed for the estimation of the threshold fines content as a function of the mean diameter ratio, d₅₀/D₅₀, and the void ratio. The results, presented herein, also show that for each tested mixture the liquefaction resistance ratio is related to the state parameter and that this relation is influenced by the effective stress level and fines content. The results on the sand-silt mixtures are supported by similar results on natural silty sands.     

Low-Temperature Synthesis and Thermoelectric Properties of n-Type PbTe

n-Type PbTe compounds were synthesized at temperatures as low as 430°C. After synthesis, the materials were ground, cold pressed, and sintered at 600°C. The effect of this low-temperature synthesis on the structural features and thermoelectric properties of as-prepared and PbI₂-doped materials was investigated for the first time. The Seebeck coefficient, and electrical and thermal conductivity were measured in the temperature range 2 K ≤ T ≤  610 K. The results show that all materials exhibit n-type conduction and the thermoelectric properties are improved by doping. ZT values reach 0.5 at 610 K, and the discrepancies with the literature are discussed.     

Efficiency Study of a Commercial Thermoelectric Power Generator (TEG) Under Thermal Cycling

Thermoelectric generators (TEGs) make use of the Seebeck effect in semiconductors for the direct conversion of heat to electrical energy. The possible use of a device consisting of numerous TEG modules for waste heat recovery from an internal combustion (IC) engine could considerably help worldwide efforts towards energy saving. However, commercially available TEGs operate at temperatures much lower than the actual operating temperature range in the exhaust pipe of an automobile, which could cause structural failure of the thermoelectric elements. Furthermore, continuous thermal cycling could lead to reduced efficiency and lifetime of the TEG. In this work we investigate the long-term performance and stability of a commercially available TEG under temperature and power cycling. The module was subjected to sequential hot-side heating (at 200°C) and cooling for long times (3000 h) in order to measure changes in the TEG’s performance. A reduction in Seebeck coefficient and an increase in resistivity were observed. Alternating-current (AC) impedance measurements and scanning electron microscope (SEM) observations were performed on the module, and results are presented and discussed.     

Thermoelectric Properties of Nanocrystalline PbTe Synthesized by Mechanical Alloying

In this work, nanocrystalline lead telluride powder was synthesized from high-purity elements by mechanical alloying by means of a planetary ball-milling procedure. The milling medium was tungsten carbide, and the diameter of the balls was varied in order to investigate the effect on the structural features of the material. Phase transformations and crystallite evolution during ball-milling were followed by powder x-ray diffraction (PXRD). The broadened PXRD peaks were analyzed with Voigt functions, revealing small crystalline size and stress introduced during the mechanical alloying process. Transmission electron microscopy (TEM) studies confirmed the material’s nanostructure, as well as the effect of ball diameter on the size of the crystals. Thermoelectric properties are discussed in terms of the Seebeck coefficient and the nominal carrier concentration, as determined by Hall-effect measurements. The enhancement of the Seebeck coefficient is reported to be higher compared with other PbTe-based nanocomposites.